Before starting we must remove the tray with the cards from the tablet that we are about to repair.

With the help of a plastic tool we will unhook all the edges of the back cover.

We remove the adhesive that gets in the way to carry out the following steps, and with a flat tip tool we will disconnect the battery in order to work with greater safety.

We remove the Phillips screw (PH # 00) that holds the shield that covers the flex connector, and with a flat tool we will disconnect the flex with POGO connectors, and thus we can remove the back cover and work more comfortably.

We disconnect and remove the bridge flex that joins the base plate and the auxiliary plate that is above the left speaker.

We extract the five Phillips screws (PH # 00) that hold the speaker, and with the help of a flat tool we will lift it.

We remove the three Phillips screws (PH # 00) that hold the auxiliary plate, and with a fine tool we will take it off.