Remove the back cover that gives access to the battery.

Remove the battery by gently prying it from the top.

Remove the SIM card before opening the case.

Remove the seven Phillips screws that hold the housing.

Insert a plastic opening tool into the joint between the rear housing and the screen frame.

Push it gently around the phone to release the case.

Separate the casing from the rest of the phone.

Release the connectors with the help of an opening tool.

Carefully remove the vibrator from the chassis.

A curved tip tool will be helpful.

Separate the plate carefully so as not to damage the flex that is connected.

Release the remaining connector, the plate will be separated.

Pull gently on the connector to remove the flex circuit from the headset and light sensor.