First we remove the back cover. For this, we will leverage with the opening tool in the notch that brings with this purpose.

Remove the battery by lifting it with the help of the tool or directly with your hands.

We removed the cards as they would prevent us from removing the intermediate casing.

We remove the twelve Phillips screws (PH # 00) that hold the case to the chassis. Then, we will unhook the notches that hold it.

In this step we disconnect the flex cables from the screen and take off the vibrator.

We remove the side keys and detach the buttons from the chassis.

Remove the Phillips screw (PH # 00) that holds the motherboard and disengage it. Before removing it, we will disconnect the coaxial antenna cable.

It only remains to disconnect the camera from the motherboard.