Before you start, make sure the tablet is off.

Remove the 4 Torx screws located on both sides.

Use the opening tool at the wide end to disengage the back cover.

Hold with a suction cup for comfort.

Remove the adhesives that hold the battery and components.

Peel off the speaker from the plastic frame. Subject to 1 Phillips screw.

Unsolder the antenna coaxial cable. For this, we apply heat with the tip of the soldering iron to the tin while, simultaneously, we pull the cable gently.

Also discard the battery cables.

Also unsolder the speaker to install on the new motherboard.

Disconnect the flex from the LCD display.

Unplug the flex from the card reader and the data from the touch screen.

Disconnect the flex from the cameras

Finally, separate the base plate, held by 3 Phillips screws.

You must weld the components back to the new motherboard.