Before starting we must remove the tray with the cards from the tablet that we are about to repair.

With the help of a plastic tool we will unhook all the edges of the back cover.

We remove the adhesive that gets in the way to carry out the following steps, and with a flat tip tool we will disconnect the battery in order to work with greater safety.

We remove the Phillips screw (PH # 00) that holds the shield that covers the flex connector, and with a flat tool we will disconnect the flex with POGO connectors, and thus we can remove the back cover and work more comfortably.

To take off the screen we will disconnect the connector from it, and we will apply heat to it. We have used a thermal mat for about 2 or 3 minutes at 70ºC, and with a pick we have been taking off all the edges of the screen.

The action of applying heat to the screen can be repeated as many times as necessary.