Characteristics

Display : 13.3 inches, HD, TFT 1280 × 800

Before starting make sure the tablet is off.

Remove the 2 Phillips screws that secure the back cover.

Use our "pizza cutter" opening tool to separate the back cover easily and without scratches.

Unplug the flex from the cameras on the motherboard, by pulling on the tab of the connector and pulling gently.

Separate the chambers from the housing to remove them.

Remove the adhesives that hold the cables and components.

Peel off the speakers from the housing with the help of a spatula.

Peel off the battery, pushing it from below with a plastic spatula.

Remove the 2 Phillips screws that hold the plate with the push buttons.

Separate the plate from the housing.

Unsolder the flex on the motherboard. For this, we apply heat with the tip of the soldering iron to the tin while, simultaneously, we pull the cable gently.

Take off the antennas.

Unsolder the antennas on the motherboard.

Unsolder the battery terminals.

Unsolder the speaker cables.

Remove the microphone from the housing bracket.

Unsolder the cables on the motherboard, like the rest of the components.

Unplug the data flexes from the display and touch screen.

Finally, separate the base plate, held by 3 Phillips screws.