Unscrew the Phillips screws (PH # 00) that hold the rear case and remove them.
We introduce an opening tool inside the housing. With a plastic tool we go all the way around unhooking the back cover until we can remove it.
Step 2 Components
Remove the adhesive that covers the motherboard.
We disconnect and remove the flex from the cameras.
We disconnected the interconnection flex.
Step 3 Drums
We disconnected the battery. We take it off and remove it.
Step 4 Components
We disconnect the flex from the load connector, the side button and the digitizer.
Step 5 Components
Take off the microphone, unscrew the Phillips screws (PH # 00) that hold the speaker and remove them.
Step 6 Motherboard
Unscrew the Phillips screws (PH # 00) that hold the motherboard and remove it.
Step 7 screen
We removed the lcd display.
Video Tutorial summary
In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.