Guide with all the necessary steps so that you can change the right speaker module with the audio connector of the Samsung Galaxy Tab S (SM-T705).
We will start by removing the SIM and MicroSD cards. For this we will open the lid, press the card and it will be ejected.
Once the cards are removed, we will proceed to remove the back cover. To do this we will introduce an opening tool between the frame and the screen and doing lever movements, we will unhook the casing.
To remove this module we will have to remove the motherboard. We will disconnect all the components connected to it in order to extract it.
We disconnected the battery, the left speaker module, the home button flex and the front button flex. We also disconnect the flex from the charging connector and disconnect the front camera and the coaxial cable at the top.
Finally, to remove the motherboard, we disconnect the flex from the screen, the rear camera and the speaker module with vibrator.
Now we remove the two Phillips screws (PH # 00) that hold the motherboard to the chassis and remove it.
To finish, we remove the two Phillips screws (PH # 00) that hold the audio connector and take it off. Now we only have to undo the module of the chassis levering with some fine tool.
