We will start by removing the microSD card so that it does not bother when removing the case. To do this, we will press it lightly so that it is automatically ejected.

On the right side of the tablet, we will find two Phillips screws (PH # 00) that hold the case to the chassis. We will remove them and begin to disengage the chassis housing.

Introducing an opening tool between the frame and the housing, we will release the notches that hold it.

Before removing the casing, we will have to take off the speaker that is stuck to it.

To finish, we remove the adhesive covering the camera connector, disconnect it and then take it off the back of the display.