We apply heat to the edges of the screen with a hot air gun, and with the help of as many spikes as necessary we will take off the screen.

We unhook the two shields of the photographs, and disconnect the two flexes that join the screen and the motherboard.

Remove the eleven Torx screws (T4) that hold the upper shield.

We remove all the Torx screws (T4) that hold the motherboard and speakers, and disconnect the rear camera as another screw is located below.

We take off the adhesives and disconnect the cables that prevent us from later removing the motherboard with the components.

We take off the front cameras and the audio connector, and we can unhook the motherboard with components.

We unhook the shield that covers the connectors of the cameras, and we can already disconnect and remove the damaged front cameras.