We disconnect and remove the interconnection flex and the digitizer flex.
Step 4 Microphone
We desoldamos the microphone and then solder it to the new motherboard.
Step 5 Armor
We disconnect the flex from the audio connector, remove the two Phillips screws (PH # 00) that hold the shield, and we can remove it.
Step 6 Speakers
We extract the four Phillips screws (PH # 00) that hold the speakers, unhook them and desold them from the motherboard that we are going to replace.
Step 7 Side push buttons
We disconnect the flex from the side buttons and take it off.
Step 8 Rear camera
We disconnect and remove the rear camera.
Step 9 Interconnection Flex
We disconnected the interconnection flex from the motherboard.
Step 10 Motherboard
Remove the two Phillips screws (PH # 00) that hold the motherboard to the chassis, remove the motherboard, and finally we just have to disconnect the front camera from the motherboard that we are going to replace to place it on the new board.
Video Tutorial summary
In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.