To remove the back cover, we will have to remove the screw that is behind the cover where the SD card goes. Then, with an opening tool, we will lever until unhooking it from the notches that hold it.
Step 2 Disconnect components
Remove the Phillips screws (PH # 00) that hold the motherboard and disconnect the components.
Step 3 Removing the motherboard
Once the components have been disconnected and the screws removed, only the camera needs to be detached in order to disengage the chassis plate.
Step 4 Motherboard
Finally, we disconnect the cameras from the motherboard.
Video Tutorial summary
In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.