Manuales / Huawei MediaPad 10 Link / Module of antennas (GPS and Wifi)

Huawei MediaPad 10 Link - Module of antennas (GPS and Wifi)

Guide with all the necessary steps for you to change the module yourself with the Wifi and GPS antennas of the Huawei MediaPad 10 Link.

Difficulty

TutorialsTabletsHuaweiHuawei MediaPad 10 LinkModule of antennas (GPS and Wifi)

For this tutorial you will need the following spared parts and tools

Professional Double Plastic Device Opening Tool

1,52 €

Screwdriver 15 in 1, Mobiles and Tablets BK-315

5,48 €

Pinza antiestática curva Baku ESD BK-15

3,50 €

Opening tool Smartphone, tablet

2,19 €

2.2" suction cup for disassembling smartphones

4,66 €

Electrical dissipating clamps, in blister

3,97 €

Do you want this tutorial offline?
Click here and download in PDF.

Tutorial: Step by step

Step 1 Micro SD card

Open the small lid located on the back, next to the camera.

Remove the micro SD card.

Step 2 Opening

Remove the hidden Phillips screw, located next to the SD slot.

Step 3

Hold the screen with the suction cup. While pulling the suction cup upwards, disassemble the back cover with the double opening tool.

Step 4

The screen is still held by the flex data cable.

Step 5

Disconnect the flex cable by pulling on the tab of the connector and pulling gently on it.

Step 6

Remove the 6 Torx screws (marked in blue) and the 3 Phillips screws (red) indicated in the photograph.

Step 7 Antenna module

Remove the antenna module, prying it gently with the opening tool.

Video Tutorial summary

In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.

Share this tutorial