First of all we must apply heat to the screen to soften the adhesive that holds it, and with the help of a suction cup we will lift the screen a little to introduce a fine tool, with which we will open a small hole and introduce one or more prongs plastic and thus less likely to damage the screen.

We remove the two Phillips screws (PH # 00) that hold the shield that covers the connectors of the battery and that of the screen, and then we will disconnect the battery to work with greater security, and we will remove the screen.

We extract the six Phillips screws (PH # 00) that hold the lower shields and we will remove them.

We disconnect the interconnection flex and we can remove the auxiliary plate that we are going to change.