Before starting, make sure the tablet is off.

Remove the SD card.

To open the back cover we will use the "pizza cutter" opening tool. Just go around the contour by pressing lightly on the joint between the lid and the chassis. You will hear several "click" as it is released.

Separate the back cover.

Disconnect the battery from the motherboard.

Take off the adhesives from the metal support, specifically those that have a padded shape and also, a part of the antennas are also glued and prevent the battery from being removed.

Remove the battery attached to its metal bracket, attached to the rest of the tablet by 8 Phillips screws.

Remove the coaxial antenna cables from the plastic guides.

Unplug the cameras, by operating the tabs on the connectors and gently pulling the flexes.

Lift the small plate, previously removing the 2 Phillips screws that hold it.

Finally, disconnect the interconnection flex with the motherboard.