characteristics

Before you start, make sure the tablet is off.

Remove the SD card, opening the lid and pressing until you hear "click".

To separate the back cover, we recommend the opening tool type "cortapizzas". Release the plastic hooks by tracing the contour with the roller while holding the equipment with a suction cup.

Remove the adhesives that cover the contacts on the motherboard.

Disconnect the interconnection and camera flexes. To do this, press the connector tab and gently pull each one of them.

Unsolder the microphone from the motherboard. For this, we apply heat with the tip of the soldering iron to the tin while, simultaneously, we gently pull each one of the cables.

Peel off the antenna above the speaker.

Unsolder the coaxial cable from the motherboard.

Also undo the left speaker.

Unsolder the battery terminals.

It is not necessary to take off the battery even though it is shown in the photographs.

Disconnect the LCD data flex and touch screen from the motherboard.

Finally, separate the motherboard. Fastened by 4 Phillips screws.