We start by removing the back cover. To do this, we introduce an opening tool between it and the frame and prying, we will unhook the notches that hold it.

We disconnect the speaker and the coaxial antenna cable from the motherboard. We also disconnected the front camera.

Then, we remove the Phillips screws (PH # 00) that hold the module and we disengage it.

We disconnected the interconnection flex and the flexes of the screen. We also disconnected the battery, the side buttons and the rear camera.

Finally, we disconnected the audio connector and the flex from the card reader. Then we remove the screw that holds the base plate and we disengage it.