We start by opening the card reader cover to remove a Phillips screw (PH # 00) that holds the back cover.

Unseal the case by prying it with a flat opening tool. In order to separate it, we will remove the battery from the lid.

We take off the flex of lateral push-buttons on the frame and disengage the microphone from the chassis. We will also disconnect the flex from the motherboard screen.

We remove the six Phillips screws (PH # 00) that hold the base plate to the chassis and remove it.

Remove the Phillips screw (PH # 00) that holds the display and then disengage it by prying it with a flat tool.