Take off the back cover using a plastic spike or a flat tool, if necessary we could apply a little heat with a hot air gun. Once we take off the back cover, we disconnect the flex from the fingerprint reader.
Step 2 Upper housing
We extract the eight Phillips screws (PH # 00) that hold the upper housing, and with the help of a flat-tipped tool we unhook the upper housing.
Step 3 Components
We disconnect all the components that are connected to the motherboard, without forgetting to remove the tray from the cards.
Step 4 Motherboard
We disconnected the rear camera from the failed motherboard.
Video Tutorial summary
In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.