First we apply heat to the back cover to soften the adhesive that holds it.

We introduce a metal tool to make our way and then we introduce a plastic spike-type tool so as not to damage the casing and we separate it around its entire contour until it is completely detached.

With a Phillips screwdriver (PH # 00) we extract the eleven screws indicated to separate the housing from the terminal with a thin plastic tool.

With a fine opening tool we disconnect the battery to work more safely.

Returning to the upper part of the terminal, we loosen all the connections found on the motherboard with the help of a thin plastic tool.

We release the coaxial cable from the motherboard to be able to remove it.

We extract the fixing screw from the motherboard to the chassis with a Phillips screwdriver (PH # 00) and the SIM tray from its housing.

With the help of a fine tool we lift the base plate from its housing and extract it

We extract the shield and the side key of the terminal with the help of an antistatic clamp.

We extract the shield of the fingerprint reader and remove the reader with the help of antistatic tweezers

With the help of a fine tool, we detach the flex from the side button from its base and extract it from its housing.