First we apply heat to the back cover to soften the adhesive that holds it.
Step 2 Back case
We introduce a metal tool to make our way and then we introduce a plastic spike-type tool so as not to damage the casing and we separate it all around until it is completely detached.
Step 3 Intermediate housing
With a Phillips screwdriver (PH # 00) we extract the eleven screws indicated to separate the housing from the terminal with a thin plastic tool.
Step 4 We disconnect the battery
With a fine opening tool we disconnect the battery to work more safely.
Step 5 Speaker module
With a Phillips screwdriver (PH # 00), we extract the seven screws from the speaker module, and with a thin plastic tool we extract it from its housing.
Step 6 Flex interconexion
With a fine tool we disconnect the connections of the interconnection flex and the coaxial cable and remove it.
Step 7 Auxiliary board
With the help of a fine plastic tool from one corner we lift the auxiliary plate from its housing and extract it.
Video Tutorial summary
In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.