First, we apply heat to the back to soften the adhesive and to be able to peel it off.
Step 2 Back case
We introduce a metal tool to make our way and then we introduce a plastic spike-type tool so as not to damage the casing and we separate it around its entire contour until it is completely detached.
Step 3 Intermediate housing
With a Phillips screwdriver (PH # 00) we extract the eleven screws indicated to separate the housing from the terminal with a thin plastic tool.
Step 4 We disconnect the battery
With a fine opening tool we disconnect the battery to work more safely.
Step 5 Components
With a fine tool we loosen all the connections that are on the motherboard to be able to remove it.
Step 6 Base Plate
Once free of connections with the help of a fine tool we lift it and extract it from its housing.
Step 7 Rear camera module
We release all the camera connections on the motherboard to remove the module and then we remove the front camera that is also on the motherboard and we will have it free of components.
Video Tutorial summary
In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.