Using a thin tool we will open a small gap, through which we will introduce one or more plastic spikes with which we will be less likely to damage the housing. When opening the case we must disconnect the flex from the fingerprint reader.
Step 3 Intermediate housing
Remove the ten Phillips screws (PH # 00) that hold the intermediate housing, and with the help of a flat tool we will unhook the housing.
Step 4 We disconnect battery
We disconnect the battery to work with a greater security.
Step 5 Speaker
We remove the seven Phillips screws (PH # 00) that hold the lower case and the speaker, and with the help of a flat tool we will unhook both the case and the speaker.
Step 6 Auxiliary board
We disconnect all the components that are connected to the auxiliary plate, and with the help of a flat tool we will detach the plate.
Step 7 Vibrator
We take off the broken vibrator that we are going to change.
Video Tutorial summary
In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.