First we will have to remove the card tray, and then with the help of a fine tool we will unhook all the edges of the back cover.

We extract the eleven Phillips screws (PH # 00) that hold the intermediate housing, but before removing it we must disconnect the fingerprint reader connector so as not to damage the flex, and with the help of a flat tool we will remove the intermediate housing.

We disconnect the battery to work with greater safety.

We remove the seven Phillips screws (PH # 00) that hold the speaker, and with the help of a flat-tipped tool we will unhook the speaker.

We disconnect the interconnection flex and the coaxial cable from the auxiliary plate, remove the Phillips screw (PH # 00) that holds the auxiliary plate, and with the help of a flat tool we will unhook it.

Finally, we only have to take off the damaged vibrator that we are going to replace.