First we must remove the card tray.

With the help of a fine tool we will unhook all the edges of the back cover.

We remove the nine Phillips screws (PH # 00) that hold the intermediate housing, and with the help of a flat tool we will unhook it.

We disconnect the battery to work with greater security.

We remove the seven Phillips screws (PH # 00) that hold the speaker module, and with the help of a flat tool we will unhook it.

We disconnect and remove both cameras.

We disconnect the coaxial cable, and using a flat tool we will remove the motherboard.

We take off the area of the contacts of the flex, and with a fine tool we will also take off the area of the push buttons.

We remove the headset.

We remove the flex bridge that is above the battery, and proceed to take off the battery.

We remove the coaxial cable, remove the Phillips screw (PH # 00) that holds the auxiliary plate, and with the help of a flat tool we will take it off.

To finish we will only have to take off the vibrator from the screen that we have to replace.