We start by unlocking the casing. To do this, we will leverage with an opening tool to release the notches that hold it.

To remove the battery, we will leverage the hole that it brings for that purpose.

Remove the eleven Phillips screws (PH # 00) that hold the intermediate casing and undo it as with the rear casing.

Take off the flex of the ignition push button of the chassis, remove the cameras and disconnect the rest of the components.

Remove the two Phillips screws (PH # 00) that hold the plate to the chassis and detach the vibrator and the flex from the volume buttons. Now we can lift the plate to disconnect the interconnection flex.

We can already desoldar the vibrator of the motherboard.