Find the opening notch on the lower right side and press to separate the casing and remove it.
Step 2 Remove battery
Remove the battery with the opening tool.
Step 3 Remove intermediate housing
Remove the 9 Phillips screws (PH # 00) that hold the intermediate housing. With the opening tool, detach the intermediate housing and remove it.
Step 4 Drop connections from the motherboard
With the tongs, take off the push buttons flex. With the opening tool release the connections of the motherboard.
Step 5 Remove motherboard
Loosen the 2 Phillips screws (PH # 00) that hold the base plate and remove it with the opening tool.
Step 6 Remove front camera
With the opening tool release the connection of the camera and remove it with the clamps.
Step 7 Remove rear camera
With the opening tool release the connection of the camera and remove it with the clamps.
Step 8 Remove pushbuttons
Desolder the connection of the push buttons and extract it.
Step 9 Extract vibrator
Unsolder the vibrator connection and remove it.
Video Tutorial summary
In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.