Weimei Neon - Auxiliary plate

Guide with all the necessary steps so that you can change the auxiliary plate of the Weimei Neon yourself.

Difficulty
1
2
3
4
5

Tutorial: Step by step

Step 1 Specifications

Dimensions : 72 x 144.5 x 9.8 mm

Weight. 167 g

SoC : MediaTek MT6735M

Processor : ARM Cortex-453, 1000 MHz, Number of cores: 4

Graphics processor : ARM Mali-T720 MP2, 500 MHz, Number of cores: 2

RAM memory : 1 GB, 533 MHz

Internal memory : 16 GB

Memory cards : microSD, microSDHC, microSDXC

Display : 5 in., TFT, 480 x 854 pixels, 24 bit

Battery : 2300 mAh, Li-ion (lithium ion)

Operating system: Android 6.0 Marshmallow

Camera : 2592 x 1944 pleles, 1280 x 720 pixels, 30 fps

SIM card : Micro-SIM

Wi-Fi : b, g, n, Wi-Fi Hotspot

USB : 2.0, Micro USB

Bluetooth : 4.0

Location / Navigation : GPS, A-GPS

Step 2 Back case

We remove the back cover, if necessary we use some help opening tool.

Step 3 Battery

We extract the battery.

Step 4 Cards

We extract all the cards that are in the phone.

Step 5 Intermediate housing

Remove the 16 Phillips screws (PH # 00) that hold the intermediate casing, and with the help of a plastic opening tool remove the intermediate casing.

Step 6 Vibrator

Take off the vibrator and desoldamos.

Step 7 Auxiliary plate

Disconnect the flex and coaxial cable, and take off the auxiliary plate to replace.

Video Tutorial summary

In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.
Share this tutorial