Weimei Neon - Frontal camera

Guide with all the necessary steps so that you can change the front camera of the Weimei Neon yourself.

Difficulty
1
2
3
4
5

Tutorial: Step by step

Step 1 Specifications

Dimensions : 72 x 144.5 x 9.8 mm

Weight. 167 g

SoC : MediaTek MT6735M

Processor : ARM Cortex-453, 1000 MHz, Number of cores: 4

Graphics processor : ARM Mali-T720 MP2, 500 MHz, Number of cores: 2

RAM memory : 1 GB, 533 MHz

Internal memory : 16 GB

Memory cards : microSD, microSDHC, microSDXC

Display : 5 in., TFT, 480 x 854 pixels, 24 bit

Battery : 2300 mAh, Li-ion (lithium ion)

Operating system: Android 6.0 Marshmallow

Camera : 2592 x 1944 pleles, 1280 x 720 pixels, 30 fps

SIM card : Micro-SIM

Wi-Fi : b, g, n, Wi-Fi Hotspot

USB : 2.0, Micro USB

Bluetooth : 4.0

Location / Navigation : GPS, A-GPS

Step 2 Back case

We remove the back cover, if necessary we use some help opening tool.

Step 3 Battery

We extract the battery.

Step 4 Cards

We extract all the cards that are in the phone.

Step 5 Intermediate housing

Remove the 16 Phillips screws (PH # 00) that hold the intermediate casing, and with the help of a plastic opening tool remove the intermediate casing.

Step 6 Components

We removed the rear camera and the flex of side buttons.

The flex of side buttons, disconnecting it would be enough, it is not necessary to remove it completely.

Step 7

Disconnect the flex that are connected to the motherboard, lift the plate and disconnect the coaxial cable from the back.

Step 8 Motherboard

We remove the front camera that we are going to replace.

Video Tutorial summary

In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.
Share this tutorial