Weimei Neon 2 - Auxiliary plate with charging connector

Guide with all the necessary steps so that you can change the auxiliary plate of the Weimei Neon 2 yourself.
Difficulty
1
2
3
4
5
Ir arriba
TutorialsSmartphonesWeimeiWeimei Neon 2Auxiliary plate with charging connector

For this tutorial you will need the following spared parts and tools

Estación de soldadura digital doble, Baku 601D SMD
58,74 €
Tweezers ESD-11
4,28 €
Terminal opening tool, plastic
1,48 €
Special SAT 0.75mm high friction PVC pick
1,12 €
Do you want this tutorial offline?
Click here and download in PDF.

Tutorial: Step by step

Step 1

Step 2 Back case

Remove the back cover, undoing it with a pick or other plastic opening tool.

Step 3 Battery

Remove the battery by pulling on the bottom.

Step 4 Intermediate housing

Remove the 9 Phillips screws.

Step 5

Remove the intermediate housing with a plastic tool.

Step 6

Disconnect the flexes from the motherboard.

Step 7 Side push buttons

We extract the flex from side pushbuttons, undoing it from the base plate.

Step 8

Remove the screw that holds the motherboard.

Unsolder the flash flex.

Disconnect the cameras

Step 9

We lift the motherboard and disconnect the flex.

Peel off the sticker that covers the flex.

Step 10 Auxiliary plate

Peel off the auxiliary plate and remove the components

Video Tutorial summary

In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.
Share this tutorial
Keywords: