We start by removing the back cover. For this we can use an opening tool or directly with the hands.

We remove the fifteen Phillips screws (PH # 00) that hold the intermediate housing and then unlock it by prying it with an opening tool.

Now, disconnect the components connected to the motherboard and remove the Phillips screw (PH # 00) that holds it to remove it.

In this step, we will remove the battery and the flex from the screen.

Then we will heat the screen at about 60 ° C for about a minute to soften the adhesive.

With the hot screen, we will slide an opening tool between it and the frame to detach it.