First of all, we will remove the tray from the cards.

We extract the six Torx screws (T4) that hold the side frames, the four screws also Torx (T4) that hold the rear case, and the two Pentalobe screws (TS1) on the bottom of the phone.

Once the side frames have been disassembled, we will have to continue removing more screws, now we will have to remove eight Phillips screws (PH # 00) and we will be able to unhook the back cover.

We extract the five Phillips screws (PH # 00), we take off the rear angle camera, and we can unhook the upper case.

Disconnect the battery for safety, and disconnect the rear camera and remove it from the support, remove the two Phillips screws (PH # 00) that hold the bracket to the base plate, take off the flash support.

We will disconnect and remove all components that bother us to lift the motherboard.

To finish we take off the headset that we are going to change with the help of a metal pick.