With the help of a SIM removal tool we remove the SIM tray.

Unscrew the two Pentalobe screws (TS1) that hold the rear housing.

Once the screws are released, we introduce an opening tool between the housing and the phone, making the whole contour we release the back cover to remove it completely.

We take off the fingerprint reader that is attached to the housing.

Unscrew the Phillips screws (PH # 00) that hold the casing and remove it.

Remove the stickers that cover the battery.

Pulling the adhesive tab we remove the battery. We can help with a tool to remove it.

We heat the screen at 80º for 2 minutes.

We introduce a metal prong between the screen and the central housing. Once introduced, we exchange it with a plastic spike so as not to scratch the screen. We perform all the contour separating the screen.

We separate the screen.

We disconnect the flex from the screen of the motherboard. We remove the screen.