With a SIM removal tool we remove the tray from the SIM card.

Unscrew the Pentalobe screws (P2) that hold the rear case and remove it by undoing it.

Unscrew the Phillips toners (PH # 00) that hold the upper intermediate casing. We take off the fingerprint reader. We disconnect the flex that connects the motherboard with the card reader.

We disconnect the flex from the battery, take it off and remove it.

We apply heat to the screen for two minutes to eighty degrees.

We introduce a metal prong between the screen and the central housing. Once introduced, we exchange it with a plastic spike so as not to scratch the casing.

We will do all the contour taking off the screen with care.

We disconnect the flex from the screen, take it off and remove it.