We apply heat with a thermal mat on the screen, with a metal tool we will open a small gap and introduce a plastic spike, with which we will take off all the edges until we can take them off all their contour.

Once the screen is separated, we will remove the Phillips screw (PH # 00) that holds the shield, we will remove it with an antistatic clamp and release the connector with the help of a plastic tool.

Once the screen is separated, we remove the tray, and remove the eleven Phillips screws (PH # 00) that hold the intermediate housing.

Once the intermediate housing of the terminal is separated, we disconnect the battery with the help of a plastic tool.

We disconnect the interconnection flex from both ends, with a battery extraction tool, we introduce it from the side by prying very slowly, with the help of a thin plastic tool, we release the adhesive until the battery is removed.