To start we apply heat to the screen to soften the adhesive, and with the help of one or more plastic spikes we will peel off all the edges of the screen.

Once the screen is detached we must remove the Phillips screw (PH # 00) that holds the shield that covers the screen connector, and we can disconnect it.

Remove the twelve Phillips screws (PH # 00) that hold the intermediate housing, and with the help of a thin tool we will lift the housing.

We disconnect the battery to work with greater security.

We remove the adhesive that is above the camera that we need to replace, and with the help of a flat tool we will disconnect it.