Place the mobile on the thermal mat for a couple of minutes. Use the pick tool to remove the screen. With a Phillips screwdriver (PH # 00) loosen the screw of the cover that covers the flex connection of the screen. Remove the lid and release the connection with the opening tool.

With the Phillips screwdriver (PH # 00) remove the screws that hold the housing. Remove the housing with the spatula tool.

With the opening tool release the connections of the motherboard. Remove the Phillips screw (PH # 00) that holds the plate. Release the plate with the opening tool.

Remove the protective adhesive. Remove the 2 Phillips screws (PH # 00) that hold the auxiliary plate and remove it with the opening tool. With the opening tool remove the housing of the motherboard. Release the connections on the motherboard and remove it.

With the opening tool release the connection of the front camera and remove it. With the clamps remove the rear camera from the auxiliary plate.

With the curved tip tool detach the sensor from the plate. Release the sensor connection with the opening tool.

With the curved tip tool release the vibrator from the plate. Unsolder the vibrator connections and remove it.

Unsolder the pushbutton connections and extract them.