With an opening tool we remove the back cover carefully, without pulling hard.
Unscrew the Phillips screws (PH # 00) that hold the sheet metal and remove it.
We disconnect the flex from the fingerprint reader on the motherboard. We remove the back cover.
Step 3 Embellisher
Remove the Phillips screws (PH # 00) that hold the trim on the base plate and remove it.
Step 4 Components
We disconnected the connection interface; the flex of the battery, the flex of the screen and the coaxial cable.
Step 5 Side push buttons
We disconnect the flex from the side buttons and remove it.
Step 6 Motherboard
Unscrew the Phillips screws (PH # 00) from the base plate and remove it by prying it off.
Step 7 Front camera
We disconnected the front camera and removed it.
Video Tutorial summary
In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.