To begin we must extract the tray of the cards.

Unhook the back cover and take off the fingerprint reader.

Remove the ten Phillips screws (PH # 00) that hold the intermediate housing and with the help of a flat tool we unhook it.

We disconnected the fingerprint reader to work more comfortably.

We disconnected the flex from the battery.

We disconnect the interconnection flex and with the help of an opening tool we will take off the battery.

We disconnect and remove the rear camera.

We take off the aujricular loudspeaker with the help of a fine metal pick.

We disconnect the flex from side buttons of the base plate.

We disconnect the coaxial cable from the motherboard.

We remove the motherboard.

We take off the flex of side push buttons on the telephone chassis with the help of a fine pick.

Remove the six screws that hold the intermediate housing.

We disconnected the coaxial cable from the auxiliary board and removed it from the phone.

We disconnect the flex that is connected to the auxiliary plate, and with the help of a flat tool we will remove the auxiliary plate from the telephone chassis.

Finally we will remove the vibrator from the screen that we are going to replace.