First we will extract the card tray.

We apply heat to the screen to soften the adhesive that holds it, and with the help of a very thin tool, and a few plastic prongs we will remove all the edges of the screen. Once detached we will remove the plastic cover that is on top of the connector, and we will be able to disconnect the screen.

We extract the thirteen Phillips screws (PH # 00) and unhook the shield.

We disconnect and remove the battery.

Unhook the plastic cover, and we can now disconnect and remove the front camera.

We extract the Phillips screw (PH # 00) that holds the motherboard.

We disconnect all the components that are connected to the motherboard.

We extract the two Phillips screws (PH # 00) that hold the vibrator and we can disconnect and remove it.

We disconnect the coaxial cables, the flex connector of the charging connector, the connector of the interconnection with microphone, remove the plastic support, and we can remove the lower auxiliary plate.

We extract the speaker.

Take off and remove the flexes that are on top of the WLC wireless charging antenna.

We take off the WLC wireless charging antenna.

Disconnect the connector of the fingerprint reader, and doing a little pressure with a tool and we already take off the reader that we are going to replace.