We apply heat to the back shell to soften the glue, and to be able to remove it we will help with a suction cup and a tine, when lifting the case we will have to disconnect the connector from the fingerprint reader.

Remove the 15 Phillips screws (PH # 00) that hold the intermediate housing and speaker module so that both the housing and the module can be removed.

We extract the tray with the extraction tool.

We disconnect the flex from the battery, and remove the front camera.

We remove the coaxial cable and the other flex cables that remain connected in the base plate to be able to remove it.

We take off the area of ??the flex connectors, and with the help of the tools we need, we remove the flex that we are going to replace.