Before starting, make sure that the mobile is turned off.

Remove the SIM tray

To begin with we will have to remove the back cover. This is very glued so we will apply heat to soften the glue.

With the help of a tool with suction cups, we will pull it to facilitate the entry of the quill.

Having entered the prong, we will carefully cover the contour to take off the lid.

Remove the 12 Phillips screws (Ph # 00) that secure the housing and speaker.

Remove the top with a spatula.

Remove the middle housing with the NFC antenna.

Separate the bottom speaker.

Disconnect the flex from the battery.

Unplug and remove the front camera.

Disconnect the flex from the screen, power and volume pushbuttons, and the headset.

Disconnect the flex from the home button on the bottom of the board.

Disconnect the ends of the coaxial cables.

Pulling the plate upwards will disconnect the lower flex.

Separate the base plate with an opening tool.

Use antistatic protection to manipulate the base plate with your hands.

Finally, take off the light sensor.