To begin with we will have to remove the back cover. This is very stuck so we will apply heat to soften the glue and with the help of a suction cup, we will pull this to facilitate the entrance of the plectrum.

Having entered the prong, we will carefully cover the contour to take off the lid.

To remove the center case, we will first remove the thirteen Phillips screws (PH # 00) and then the SIM card tray.

If we have already removed the screws and the tray, we can start to disengage the entire screen of the casing.

In this step we will disconnect the components that hold the plate. We disconnected the battery, the flex with earphone, the front camera, the flex screen, the flex of the home button and the coaxial antenna cables.

After disconnecting the components, we will disconnect the motherboard from the auxiliary plate as we showed in the first two photos. Then we can undo it and remove it.

After removing the base plate, behind it, we will find the upper microphone. We will simply disconnect it and disengage it in order to remove it.