We start by applying heat to the back of the terminal to be able to remove the battery cover

Then we remove the sim tray and then with the help of a thin plastic tool we introduce it and begin to take off the battery cover all around its contour until it is separated.

We take off the NFC antenna and wireless charging from its lower part to be able to extract the intermediate housing

With a Phillips type screwdriver (PH # 00) we extract the nine screws and remove the intermediate casing from its housing.

With a fine tool we release the NFC antenna connector and wireless charging

Then we disconnect the battery to avoid any type of incident.

Here we will need to extract the motherboard to extract one of the cameras.Firstly, we will disconnect all the connections that are on the motherboard and extract the screw that we mark Phillips type (PH # 00) to be able to remove the motherboard from its housing.

With the help of a fine tool, we disconnect the cameras and we re-install them from their housing and we will have the motherboard free.