First of all we must apply heat to the casing to soften the adhesive that holds it, and with the help of a fine enough tool we will open a small hole through which we will introduce one or more plastic spikes, with which we will take off all the edges of the housing.
Step 2 NFC antenna and wireless charging
We disconnect and detach the NFC antenna module and wireless charging.
Step 3 We disconnect battery
We remove the five Phillips screws (PH # 00) that hold the shield, and once removed we can disconnect the battery to work with greater security.
Step 4 Speaker
We extract the five screws that hold the speaker, and with the help of a flat tool we unhook it.
Step 5 Cover
We remove the four Phillips screws (PH # 00) that hold the top cover, and with the help of a flat tool we will unhook it.
Step 6 Screws
We remove the two Phillips screws (PH # 00) that hold the rear camera module and the motherboard.
Step 7 Motherboard with rear cameras
We disconnect all the components that are connected to the motherboard, we also remove the card tray with the help of the extraction tool, and we can now lift the motherboard.
Step 8
To finish we will remove the shield that covers the buttons, and we can already remove the buttons, and if you also need to replace the keys, you must push them from inside the phone chassis.
Video Tutorial summary
In this video you can watch a quick summary of the tutorial, but we recommend to follow the complete tutorial, with its explanations and detailed images.