First of all we must apply heat to the casing to soften the adhesive that holds it, and with the help of a fine enough tool we will open a small hole through which we will introduce one or more plastic spikes, with which we will take off all the edges of the housing.

We disconnect and detach the NFC antenna module and wireless charging.

We remove the five Phillips screws (PH # 00) that hold the shield, and once removed we can disconnect the battery to work with greater security.

We remove the four Phillips screws (PH # 00) that hold the top cover, and with the help of a flat tool we will unhook it.

Finally we will take off the handset that we need to replace.