To begin we must apply heat to the back cover of the phone, and with the help of a thin metal tine we will open enough the back cover, so that it allows us to introduce plastic tines to avoid scratching the case.

We remove the 16 Phillips screws (PH # 00), and with the help of a flat tool we will unhook the upper intermediate casing and the loudspeaker.

We disconnected the battery for safety.

We disconnect and remove the front cameras.

We disconnect the flex from the screen and the flex from the audio connector.

We extract the 3 Phillips screws (PH # 00) that hold the motherboard.

We take off the audio connector.

We extract the tray of the cards with the help of the extraction tool.

Now we can remove the motherboard with the module of the rear cameras.

Unhook and take off the flex with the push buttons that we have to replace.