Remove the back cover of the mobile. Use the opening tool.

When the lid is removed, the phone's battery will be accessible.

Remove the battery and the pencil.

The housing is secured with 12 Phillips screws. Use an appropriate screwdriver.

Use an opening tool to separate the middle housing.

The plate is held by the camera connectors, proximity sensor, etc.

Disconnect the six connectors and the plate will be loose.

The sensor and the camera are supported by a small support. Remove it to access them.

Remove the flex circuit that includes the front camera and proximity sensor.

Remove the screw that holds the headset.

Remove the flex with earphone and audio output.

Take off the chassis circuit.

Use a plastic tool to avoid damaging or scratching the chassis.

Heating the area with a HOT GLASS will help it to take off easier and faster.

Take off the flex to extract it.

Peel off the vibrator from the housing by inserting a pointed tool under it and prying it gently. Do not pull on it until it is completely detached as it can break the flex cable.

Install the components in the new screen.

If you want to change only the glass of the screen, in case of breakage for example, consult our manual of separation of displays:

http://yoloreparo.com/demo/manuales/otras-reparaciones-109/separacion-de-displays-613