Guide with all the necessary steps so that you can change the lower flex yourself with the mUSB charging connector and the microphone of the Samsung Galaxy NOTE 2 (N7100)
Remove the battery cover. Use a plastic tool to avoid damaging or scratching the case.
Make sure the mobile is turned off.
To remove the battery, pull on the bottom.
Remove the 9 Phillips screws that hold the housing.
Separate the intermediate housing. Use a plastic tool to avoid damaging or scratching the case.
Remove the Phillips screw to remove the lower module.
Peel off the bottom plate with a plastic tool.
If necessary, apply heat with the Hot Glass.
Disconnect the coaxial cable from the antenna.
