To begin, we will apply heat to the back cover to soften the adhesive that holds it, and with the help of a thin tool, we will open a small hole through which we will introduce one or more plastic spikes. with which we will take off the edges and will be less likely to damage the housing.

We remove the five Phillips screws (PH # 00) that hold the shield, disconnect the wireless charging connector and the NFC antenna, and with the help of a flat-tip tool we will take it off.

Remove the five Phillips screws (PH # 00) that hold the speaker, and with the help of a flat tool we will unhook it.

We disconnect the two interconnection flexes, remove the three Phillips screws (PH # 00) that hold the auxiliary bale, and with the help of a flat-tip tool we will take off the damaged auxiliary plate that we have to change.